| Maintenance Lubrication: Operating circumstances will dictate the frequency of required lubrication. It is highly recommended that the XL 650 be cleaned and lubed after every 3000 rounds of operation. Use oil or wheel bearing grease. Never use penetrating lubricants, aerosol sprays, or solvent type lubes, such as WD-40 or Break Free |
Lubrication Points: Shellplate bolt - Grease.Main Shaft Lubrication use only 30 wt. motor oil. Once again, do not use penetrating lubricants, aerosol sprays, or solvent type lubricants. | |