1. Hold the washer (see arrow Figure 4) over the hole on the right side of the crank and insert the
handle.
2. Place a 5/32" Allen wrench or screw driver through the hole
in the handle to help your grip.
3. Tighten the nut using a 9/16" wrench. Operate the handle slowly
to ensure that the machine operates smoothly. Make sure that the handle and the crank
completely clear the bench. Contact with the bench may hinder its range of movement.
Observe the movement of the shellplate platform and verify that there is no interference
or contact of the case insert slide and the chute/bin mount Figure 5.
 |
Figure 4 |
 |
| Figure 5 |