650package_partial.jpg (16961 bytes)
packages_14_15_16.jpg (10686 bytes)

Unpacking the XL650

  After opening the box, check the contents against the list below. If any items are missing or damaged,call us right away and we will send out a replacement at no charge.
  The following should be included:
1.  Machine with toolhead and toolhead retaining pins installed
2.  Operating handle assembly with washer and lock nut
3.  Casefeed mounting post
4.  Casefeed tube
5.  Casefeed support bracket
6.  Primer Early Warning System bag containing:
    a.  Primer Early Warning System (with AAA battery included)
    b.  Primer follower rod (16" black plastic rod)
7.  Primer system parts bag containing:
    a.  Powder Measure Failsafe assembly (10" black metal rod w/ hardware)
    b.  One small and one large primer pickup tube -12" aluminum tube each with plastic tip - green tip (large), yellow tip (small)
    c.  One large and one small plastic tip, (spares)
    d.  Primer feed disk (2" diameter metal
       disk w/16 small holes)
    e.  Primer magazine (15" aluminum tube w/ brass tip)
    f.  Primer punch assembly. (metal w/spring, approximately 2 x 1/2")
    g.  Two steel hitchpins

 8.  Conversion kit box (empty)
9.  Conversion kit includes caliber specific:
    a.  Powder funnel
    b.  Casefeed adapter
    c.  Three locator buttons
    d.  Shellplate (installed)
    e.  Station 1 locator (installed)
    f.  Casefeed arm bushing (installed)
    g.  Body bushing (installed)
10.  Powder system with powder die
11.  Accessory box containing:
    a.  Cartridge bin (blue plastic, approximately 3 x 4 x7")
    b.  Ejected cartridge chute (black metal, wrapped in bubble pack)
    c.  Two 1/4" x 20 x 3": hex bolts and two 1/4" x 20 nuts
    d.  Two Aluminum tube clamps
    e.  Spent primer cup (blue plastic)
    f.  Extra powder bar
    g.  Three die lockrings (7/8 x 14" thread)
    h.  Seven Allen wrenches (1/4", 3/16", 5/32", 9/64", 1/8", 3/32", 5/64")
12.  Casefeed assembly (optional)
13.  Casefeed accessory bag containing:
    a.  Casefeed funnel adapter (white)
    b.  Spacer washer
    c.  Casefeed mounting post set screw
14.  Mounting hardware kit (optional)
15.  Three die set (optional)
16.   Powder Check System
Top of the Next Column Next...