Step 12 Change the Body Bushing Figure 176. The new body bushing is located in the caliber
conversion kit.
1. The body bushing is located on the right side just above Station
1 Figure 177. Remove the body bushing by slipping an Allen wrench
through the cross hole and twisting it counter- clockwise.
2. Install the new body bushing.
Step 13 Replace the
casefeed arm bushing and casefeed adapter Figure 178. The new
casefeed adapter and casefeed arm bushing are located in your caliber conversion kit.
1. Remove the casefeed tube Figure 179.
2. Remove the casefeed adapter Figure 180.
3. To replace the casefeed arm bushing first raise the platform. Remove
the casefeed arm bushing (currently installed in your machine) and replace it with the new
one Figure 181.
4. After installing the new casefeed arm bushing, install the new
casefeed adapter.
5. Reinstall the casefeed tube by placing the casefeed tube into
the casefeed adapter and snapping it into the metal clamp Figure 182.
Note: One end of the casefeed tube is
beveled and one end is squared off. Insert the squared end of the tube (down) into the top
of the casefeed adapter.
 |
 |
 |
 |
 |
 |
 |