Rifle Toolhead Set Up (Page 1)
To set up the toolhead you'll need to have your empty brass on hand. For your convenience Dillon Precision offers a wide variety of new primed and unprimed brass. For easy access, place your brass in an open container.
Station 1 - About the Case Gage (Figure 71)
To install and adjust a sizing/decapping die you must have a case gage and know how to use it. The sizing die shapes the case. The purpose of the case gage is to determine whether or not the case has the proper shape, which in turn will tell you if your sizing die is properly adjusted.
Note: Case gages are caliber specific.
 |
Figure 71 |