The XL 650 comes equipped with an automatic primer
system.The XL 650's automatic primer system is protected by a steel shield which is
permanently secured to the primer feed body and must never be removed. The primer magazine
is located inside of a steel shield Figure 122. Primer magazines come
in two different sizes - large and small Figure 123.Your machine comes
with both. One comes installed in the machine, the other is located in the primer
accessory package. If you ordered your machine set up in a particular caliber, the
magazine installed should be the proper one for the caliber you selected. However, you
should check to make sure. By comparing the two magazines Figure 123
you will be able to determine which is large and which is small.
To change the primer magazine:
1. Remove the primer shield cap Figure 124.
2. Remove the primer magazine by pulling it straight up. Figure122.
3. Insert the new primer magazine Figure 125 and
replace the primer shield cap.
 |
 |
 |
 |