(1) Requires casefeed adapter
funnel (#13688), see manual for installation instructions.
(2) Requires casefeed spacer washer, see manual for installation instructions.About Powder Bars: Dillon Precision
manufactures four types of powder bars for the XL 650:
1. Extra Small - use for dropping less than 3 grains of powder.
2. Small - use for dropping 3 to 20 grains of powder.
3. Large - use for dropping 20 to approximately 45 to 50 grains of
powder.
4. Magnum - use for dropping 50 or more grains of powder.
The extra small powder bar is used when
loading 32 Auto, 32 S&W, and 32 SWL. Both the extra small powder bar and the
magnum powder bar are non0standard items and are ordered separately. The large and
small powder bar, on the other hand, are standard equipment and are included with every XL
650. If you ordered your machine set up for a specific caliber, the proper size
powder bar should already be installed. |