Station
Three - Two operations occur here involving wad and shot insertion.
In the wad swing arm (#16677) we've installed a caliber specific wad guide (#16681). (Figure 22)
| Click on image to see larger picture |
 |
| Figure 22 |
| Click on image to see larger picture |
 |
| Figure 23A |
| Click on image to see larger picture |
 |
|
|
The shot bar has a
preliminary setting for 1 1/8 oz shot weight. The shot bar will need to be adjusted to
your desired weight. (Figure 23A)
The body collar adjustment screw (#13736) has been adjusted to seat the 1 1/8 oz
(WAA-12) plastic wad into the hull. The shot dispenser bellcrank makes a complete stroke
and dispenses one charge of shot wile the wad is being seated into the hull. (Figure 23B)
Turning the body collar adjustment screw (#16736) clockwise (too high) will raise
the shot dispenser, reducing the amount the wad is seated into the hull and may result in
an incomplete stroke of the bellcrank. (Figure 23C)
| Click on image to see larger picture |
 |
| Figure 23B |
| Click on image to see larger picture |
 |
| Figure 23C |
|
