| The SL 900 shotshell
machine has been assembled and tested using Winchester AA hulls. A sample is included with
the machine. Station One - The collet sizer is adjusted for resizing
the brass base. (Figure 20)
| Click on image to see
larger picture |
 |
| Figure 20 |
Station Two - Inside the powder die (#16744) you'll find
the powder funnel (Figure 21).
| Click on image to see
larger picture |
 |
| Figure 21 |
This part uniforms the top of the shotshell hull and dispenses one
charge of powder into the hull. The powder bar will need to be adjusted to the desired |
|
powder weight.
Its important to use a quality powder scale to do this. (Figure 21A)
| Click on image to see
larger picture |
 |
| Figure 21A |
The powder die has been adjusted to a height so that the powder
measure bellcrank can make full strokes when activated. (Figure 21B)
| Click on image to see
larger picture |
 |
| Figure 21B |
Turning the powder die (#16744)
counterclockwise will raise the powder system, reducing the amount of stroke the bellcrank
has. (Figure 21C)
| Click on image to see
larger picture |
 |
| Figure 21C |
|
