Figure
6 The locator buttons must be placed at Stations 2, 3 and 4 to prevent the
cartridge from sliding off of the shellplate. The buttons can be removed to access the
case at these stations.
 |
| Figure 6 |
Figure 7 Remove the cap from the
top of the powder die (#13865). The cap retains the expander/powder funnel during
shipping.
 |
| Figure 7 |
|
|
Figure
8 Make sure the powder funnel/expander is free to move in the powder die
and reinsert it as shown.
 |
| Figure 8 |
Figure 9 With the cap removed and
the expander/powder funnel in position, you are now ready to install the powder measure.
Place the powder measure on top of the powder die.
 |
| Figure 9 |
|
