Be sure to use the necessary precautions when loading lead
bullets or when casting lead bullets. Exposure to lead can cause cancer, birth defects,
and reproductive problems. Be sure to wash your hands thoroughly after handling lead. When
firing lead bullets, be sure that you have adequate ventilation. Keep any lead items out
of reach of children.
Press forward firmly on the handle once it is at the aft position to seat your
primers fully.
Watch the powder bar function to make sure you’re getting powder.
Set the bullet straight on the case at Station Three so that it enters the die
correctly. |
|
Watch your supply of powder, you’ll be using it faster
than you think you are.
Take your time and learn the machine and its function. The RL 550B will deliver
hundreds of trouble free rounds in short order, just relax and take your time in the
beginning.
Keep it clean – primer residue, spilled powder and just plain dirt can jam
your machine.
Clean your powder bar about every 500 rounds. Some powders build up and will
eventually stick the powder bar. Paint thinner, acetone or lacquer thinner works well to
remove any build up. |
