dpp.gif (10671 bytes)

tTable of Contents

RL 550B Automatic Powder System
 
13426* Powder Funnel
.45 Cal Pistol
13644 Powder Bar Spacer
13691 Powder Measure Tube Only
13782* Powder Funnel
.22 Cal Rifle
13793 Roller
13817 Bellcrank Kep Nut
13845 Collar Sleeve
13848 Bellcrank Bushing
13871 Bellcrank Cube
13882 Powder Measure Lid
13893 Powder Bar Post, Large
13904 Bellcrank Screw
13921 Plastic Plug
13939 Clamp Screws
13943 Powder Bar Bolt
13951 Powder Bar Post, Small
13958 Powder Bar Bolt Washer (not pictured)
14036 Powder Bar Spring
14037 Clamp/Bracket Screw
14041 Bowed Washer
14067 Die Lock Ring
14202 Powder Measure Tube Screws
14808 Collar Roller Bushing
20062 Powder Bar Assembly, Small
20063 Powder Bar Assembly, Large
20064 Powder Die
20259 Connector Body Collar
20319 Bellcrank
20780 Powder Bar Assembly, Extra Small
21353 Powder Bar Assembly, Extra Large
22273 Powder Measure, Part
20303 Powder Measure Failsafe Kit
13799 Stripper Wing Nut
13801 Tinnerman Nut Insert
13885 (not pictured – see the RL 550B Schematic to identify part)
13929 Throttle Clip
13953 Shoulder Washer
13960 Rod
14033 Rod Spring


Click on schematic to see larger version
pdr_measure_assy_b.gif (25516 bytes)

Top of the Column

Continued...

WARNING:  This powder measure drops a full charge of powder each time the operating handle is cycled. If, for any reason, you believe that more than a single measure of powder was dropped or you think that you may have cycled the handle more than once on a single case, you need to empty the case and start over.
  A double charged case can result in bodily injury or a damaged firearm.
                   
* Indicates a caliber specific part.  See the Caliber Conversion Chart for the caliber that you are  loading for.

contents Top of Page

Table of Contents
Introduction
Don't Suffer in Silence
Mounting the RL550B to Your Bench
Safety Points to Know Before You Begin
To Begin Loading
  Page 1
  Page 2
What Primer Size?
The Toolhead
Choose Your Dies
Carbide Dies?
Setting Your Pistol Dies
  Page 1
  Page 2
Adjusting the Powder Charge
Primer Early Warning System Installation
Primer Magazine
At Last
Troubleshooting
Remember
Notice
Schematics and Parts Lists
Charts

Dillon Precision Products, Inc.
8009 E. Dillon's Way
Scottsdale, AZ 85260 U.S.A.

Call Toll Free 800-762-3845 or 602-948-8009 ° Fax 602-998-2786
Open 7-6 MST, M-F; 8-3 Sat.

E-mail Technical Questions to: tech@dillonprecision.com
E-mail Order Questions to: dillon@dillonprecision.com
E-Mail for Catalog requests to: catalogs@dillonprecision.com

Have technical questions about Dillon Precision's products? Please send them to dillon@dillonprecision.com

Have comments about this web site? Please send them to comments@dillondigital.com
Copyright © 1998 Dillon Digital Innovations, LLC
Last modified: November 29, 1998