Place a
bullet on the empty case and move the handle down. Thread the bullet seating die into the
toolhead until it comes in contact with the case/bullet. (Figure 17)
|
| Figure 17 – Installing
the bullet seating die in Station #3. |
In 1/4 turn increments, thread the bullet seating die clockwise while you move
the handle up and down, until the proper loaded length is reached. (Always use a loading
manual for loaded length information.) |
|
Tighten the die lock ring
and the lock ring on the seating stem. (Figure 18)
|
| Figure 18 – Tightening
the lock ring on the seating stem. |
Examine the cartridge you’ve just assembled, checking the
overall length. Advance the cartridge to Station #4.
Continued... |
