Click on image to see larger picture.
 |
| Figure 25 – Insert a pistol
powder funnel into the powder die. |
Slide the funnel into the powder die and tighten the set screw, assuring
yourself that it has entered the groove in the funnel. (Figure 26)
|
|
With the resized case in Station #2, move the handle down and thread the powder die
into the toolhead until the funnel comes in contact with the case. In 1/4 turn increments,
thread the powder die clockwise while you move the handle up and down until you begin to
see a minor bell shape appear on the mouth of the case.
Click
on image to see larger picture.
 |
| Figure 27 – A properly belled
pistol case. |
Tighten the die lock ring. Advance the case to Station #3.
Continued... |
