This set screw needs to be loose in order to align the primer cup with the platform. Lower the platform onto the primer cup (Figure 8), then tighten the set screw while the cup is in the platform. (Figure 9)

Top of the next column

  The advantage of this system is simple. Once you have adjusted your dies just the way you want them, they can stay that way. Plus, changing to another caliber becomes a simple matter of pulling two pins and sliding the toolhead out. (Figure 10)

  Before you begin loading, make sure that the toolhead is secured by the toolhead pins.

The Toolhead

Pistol Ammunition
    Page 1
    Page 2